Balmoral has manufactured subsea insulation ancillaries for over 30 years, specialising in factory moulded half-shell, housing, clamp and retro-fit options using a variety of material technologies. The company has extensive experience of producing half-shell insulation shrouds in excess of 4m long and up to 650 litres in volume. Unlike linepipe or cast-in-place insulation, which is designed for hot-dry service, half-shell shrouds, housing, clamp and retro-fit insulation products endure hot-wet service as the cavity between the structure and insulation is flooded with seawater. Balmoral’s Elastotherm® systems have been selected to provide suitable hot-wet performance over a design life of up to 30 years. Balmoral’s insulation shrouds can be designed to accommodate minimal fluid transfer rates over their service life which is particularly important where a long cool-down rate or target U-value is required. For products requiring extremely tight geometric tolerances, Balmoral’s in-house machine shop, with an extensive range of 5-axis CNC, vertical borers and milling machines can be used. Keeping the design, project management, moulding, finishing and testing processes in-house, gives full control over the workscope. Balmoral draws on its extensive engineering experience and comprehensive R&D programmes to offer FEA or CFD analysis of project design parameters to ultimately provide the most cost effective coating solutions. Early dialogue with clients means that optimum fit for purpose, through life solutions can be identified and implemented. New, state-of-the-art, technical and subsea test centre facilities offer extensive laboratory and test capabilities to ensure all materials meet stringent industry requirements. The Balmoral Elastotherm® product range is ideally suited to factory-moulding processing, producing components such as half-shell shrouds, housing, clamp and retro-fit insulation products. The company offers systems suitable for a wide range of applications, including: Excessive depth/hydrostatic pressure None of Balmoral’s insulation systems contain polymeric or hollow glass microspheres and are therefore suited to depths to 7000msw. Hot/wet conditions Balmoral has a wide range of Elastotherm® thermal insulation materials offering hot-wet temperature resistance up to 140°C. Where constant insulation properties are required Service lives of up to 30 years are typical. Where high strains are anticipated during installation or service Balmoral has a wide range of Elastotherm® thermal insulation materials, each having their own specific set of mechanical properties. Flexible or rigid materials can be selected based on the required application and temperature resistance. Specific advantages of Elastotherm® thermal insulation systems include: Immunity to hydrostatic compression due to the absence of hollow glass or polymer microspheres Extremely good hot-wet performance Machinable grades available allowing intricate geometries and tolerances to be achieved Standardised seal design Integrated lifting points for ease of handling Simplistic handling and installation procedure Insulation covers / doghouses Subsea pipelines, flowlines, risers and associated equipment carrying high temperature hydrocarbons must be insulated to prevent cooling and solidifying during the flow process. However, the connections between the lines and subsea equipment can form cold regions unless properly protected. Balmoral has developed a range of insulation products to help maintain the overall flow assurance. Using static or transient finite element analysis, Balmoral designs insulation covers tailored to match either a project’s required overall heat transfer coefficient or design ‘cool down’ time and incorporate radial and longitudinal seals to ensure thermal integrity. Balmoral’s field-proven sealant system helps prevent excessive water movement either from within the insulation covers or into the assembly. The covers can be designed to be mounted onboard the offshore construction vessel or installed subsea by either a diver or remotely operated vehicle. The cover mounting procedure and closure system must be safe, fast and easy, requiring the minimum number of standard tools.
-
Sep 10, 13:34 pm
Subsea insulation solutions